3D Printer Starter Kit: What Kids and Beginners Need to Start
20. Nov 2026Translation missing: de.blog.post.reading_time

3D Printer Starter Kit: What Kids and Beginners Need to Start

Strip a 3D printer starter kit for kids back to what actually gets used. There are three things in the box that matter. The printer itself. Enough PLA filament to get through the first few weeks. And two or three cheap tools. A plastic scraper is the one you will reach for first.
The example I work through below is the X-MAKER JOY AI+ Deal Pack. The printer plus a PLA set in 4 colors. At a $249 holiday price.
What follows is sorted the way a family actually buys it. What you need on day one. What helps in the first month. And what can wait until you can see how much your child really prints.

What a 3D Printer Starter Kit Should Include

Some of this you need before the first print, and some of it can sit in the cart until week three. This is how we’d split it for a family with a first printer.

The Printer (Day One)

An enclosed printer makes the biggest difference for kids, because the hot nozzle sits behind a door. The X-MAKER JOY AI+ kids’ printer shuts with a magnetic door and runs from the free app on a tablet or phone, so there’s no screen menu to work out.
That app holds 20,000+ ready to print designs — the same library the X-MAKER AI+ uses — with no subscription. At up to 400 mm/s, the JOY can have a small toy ready the evening it’s set up.

What Comes in the Box (Day One)

Both printers ship with what you need for a first print. Here is what each box holds, per the AOSEED quick guides:
  • X-MAKER JOY AI+: the printer, a starter roll of PLA filament, a magnetic baseplate, a filament holder, pliers, a power adapter, a calibration card, DIY stickers, and a quick guide.
  • X-MAKER AI+: the printer, a starter roll of PLA filament, a magnetic baseplate, a filament holder, pliers, a power cord, a calibration card, a tool kit, and a quick guide.
When that first roll runs low, AOSEED PLA filament is the refill to buy. Both quick guides recommend AOSEED filament to keep the nozzle printing smoothly.

PLA Filament (Day One)

PLA is a plant based plastic, and AOSEED PLA is the one both quick guides recommend. The starter roll in the box tends to run out faster than parents expect. Our guide on how much filament you need has the gram counts, so we won’t repeat them here.

A Plastic Scraper (Day One)

A small print can grip the build plate tighter than little fingers can manage. That is when a scraper earns its place. It slides underneath and pops the print off without leaving a scratch. On its own it’s about $5 to $10, or in a basic tool kit for about $12 to $25.

Extra Colors (First Month)

Kids get bored of one color fast. The PLA filament set in 4 colors adds four 200 g rolls in green, yellow, blue, and purple, which covers a lot of small toys and keychains.

A Second Build Plate (First Month)

A second plate helps once printing becomes a daily thing. The magnetic baseplate for the JOY flexes, so a finished print pops off with a little bend, and you can start the next job while the first toy is still being admired.

Nozzle Cleaning Needles (First Month)

Most of the time an $8 to $15 set of needles just sits in a drawer. Then a print comes out thin or patchy, with lines missing where they should be solid. That’s usually a partial clog — a needle pushed through once the nozzle has cooled clears most of them.

Filament Storage (First Month)

Soft, stringy filament is the giveaway — storage was never a footnote. PLA picks up moisture from the air, and the FIRST robotics filament storage notes recommend sealed storage for it. An airtight bin and a few silica gel packs, about $10 to $25, are enough for a family printer.
Prices checked November 2026.

What Can Wait

Three AOSEED parts are better bought later. Once a few weeks of printing have shown how much your child actually prints, that is. You’ll find all of them in the AOSEED accessories collection.

A Second Filament Holder

Each printer already comes with one holder that mounts on the machine. A second filament holder earns its spot when spare rolls start piling up, since it gives the next roll a place to sit instead of rolling around the desk.

Spare JOY Nozzle

A spare JOY nozzle earns its keep when a clog will not clear with the needles. The whole nozzle module swaps out as one piece. So the fix takes minutes, not an afternoon of tinkering.

Filament Detector

A filament detector earns its place on a long print. It notices the moment a roll runs out partway through. That warning can save a two hour print from ending as half a castle.
The 50 piece tool kits sold for adult hobby printers can stay on the shelf, too. Most of the files, knives, and wrenches in them belong to open frame machines that need regular tinkering. A sealed kids’ printer rarely calls for them.
People who have done this before tend to give the same advice. Buy the basics. Print for two weeks. And only then buy whatever kept slowing you down.

Printer Only or Bundle?

Buy the bundle if your child will print more than a few times a week in the first month. If it’s more of a weekend project, the printer and its starter roll are fine for now.
Holiday prices hold until January 5, 2027, with no code, and our roundup of Black Friday 3D printer deals lists every bundle side by side.

X-MAKER JOY AI+ Deal Pack

At the $249 holiday price, you get the JOY plus the PLA set in 4 colors, the simplest way to start with more than one color.

X-MAKER JOY AI+ Creation Pack

This one is $279 and adds a creation kit. So the parts coming off the printer become a car. Or a toy that actually moves, wheels turning and all. Instead of something that just sits on a shelf.

X-MAKER AI+ Deal Pack

For $339, the bigger printer comes with the same four rolls. Our breakdown of how much a 3D printer costs shows what filament adds up to over a year.

X-MAKER AI+ Creation Pack

It costs $365. On top of the four rolls, you get two creation kits.

Starter Kit by Age

Ages 4 to 8 is JOY Deal Pack territory. The child chooses a design and taps print. A five-year-old can do that part alone. While a parent loads the filament and helps pop the first toys off the plate. From unboxing to the first small toy, allow about 30 minutes.
From 8 to 12, builders usually want a print that does something. Not just sits there. The JOY Creation Pack adds a kit for cars or toys that move. So something printed on Saturday morning can be racing by Saturday afternoon.
Creation kits also work without a printer. The X-Auto car kit ($13.99) or the X-Fun kit ($21.99) makes an easy add on for a younger sibling who wants in.
From 9 to 16, the X-MAKER AI+ with its touchscreen makes more sense in its Deal Pack. Its 150 mm build space fits bigger projects, it prints at up to 400 mm/s, and the 3.5 inch screen has a child lock, so a teen can start prints without your phone.
It handles PLA and ABS, though we’d stick with AOSEED PLA at home.

FAQs

What Do I Need to Start 3D Printing?

A printer, PLA filament, and a scraper are enough for the first day. Add extra colors, nozzle cleaning needles, and an airtight bin for filament during the first month. With an AOSEED printer, the app runs on a tablet or phone, so you don’t need a computer.

Is a 3D Printer Bundle Worth It?

Usually, if your child will print several times a week. The starter roll goes quickly, and a bundle saves a second order in January. If it’s more of a weekend hobby, the printer alone is fine, and you can add AOSEED PLA later.

What Filament Should Beginners Use?

Beginners should use AOSEED PLA in 1.75 mm, the filament both AOSEED quick guides recommend. PLA prints at lower temperatures than ABS, has very little smell, and sticks well to the plate. HCC Libraries also suggests plain filament for first projects rather than silk or glitter types.

Do Kids Need a Computer to 3D Print?

No. The AOSEED app runs on a tablet or phone, and the JOY has no screen of its own. Kids pick or design a toy in the app and send it to the printer over WiFi.

Start Small and Add as You Go

Start with the printer, a few colors, and a scraper, then add parts once you see how often your child prints. Our beginner’s guide to toy making covers that first week at home.
AOSEED KIDS 3D PRINTERS

 

You may also like

X-MAKER

$319.00 $489.00

X-Racer

$34.99 $48.99

X-Fun

$21.99 $26.99

X-Music

$12.99 $15.99

X-Auto

$13.99 $19.99

Further reading